CUHL3518 Baldor Motor 1/2HP 1725RPM 56C TEFC 115/208-230Volt 1 Phase 35X061N406G1

Specification #35X061N406G1

Baldor electric motor CUHL3518 is suitable for unit and baggage handling, conveyors, packaging equipment, machine tools, hoists, elevators and door operators. Baldor Unit Handling motors feature an oversized low profile top mounted conduit box on 56 & 140T frames that provide easy access for making connections. Footed frames include slotted feet for easy mounting on OEM conveyors.  The Super-E® motors (CEUHM/VEUHM) meet NEMA Premium Efficiency requirements, have a 1.15 service factor and Class F insulation. Baldor Unit Handling motors are also UL/CSA recognized and CE certified. 143-145TY and 143-145TCY frame motors have a special base which include 56, 143, and 145 mounting slots used on OEM conveyors.

Catalog Number    CUHL3518
Enclosure    TEFC
Frame    56C
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    .500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    208.0 V @ 60 HZ
115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CE
CURUS
UKCA
WEEE
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    6.200 A @ 115.0 V
3.100 A @ 230.0 V
3.100 A @ 208.0 V
Design Code    N
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    72.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    3.1 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    N
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Finish    CLEAR COAT
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3518LC
Mounting Arrangement    F3
Number of Poles    4
Overall Length    13.23 IN
Power Factor    72
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1740 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None