FF25E2XS US Motors 25HP 1800RPM 284TS ODP 200/400V 3 Phase Model HM41
SKU:
FF25E2XS
Regular price
$1,811.94
Regular price
Sale
Sale price
$1,811.94
- Description
- SPECS:
Description
Model: HM41
Buy US Motors FF25E2XS by Nidec (Emerson) for a reliable AC electrical motor.
Use in a wide range of industrial and commercial applications, including pumps, fans, blowers, machinery, and compressors. From water treatment to manufacturing to facilities management, US Motors manufactures quality products to meet your needs.
- For fire pump applications per NFPA®† 20 where contaminants are minimal.
This three phase motor features:
- Class F Insulation, Class B Rise At Service Factor
- Rolled Steel Frame 250-320, Cast Iron Frame 360-440
- Aluminum End Shields 250, Cast Iron End Shields 280-440
- Premasked Mylar Nameplate 250-320, Stainless Steel 360-440 Frame
- 40°C Ambient, NEMA®† Design B Performance On 60 Hertz Sine Wave Power
- Regreasable Bearings 180 Frame & Larger
- Double Shielded Bearings 250-400, Open On 440 Frame
- Lifting Provisions 210 Frame & Larger
- Suitable For Wye-Delta Start 250 Frame & Large
- Dual Voltage Ratings Suitable For Part Winding Start (PWS) On Low Voltage
- 230/460 & 575 Volt Ratings Comply With NRCan Standards
- 230/460V Ratings Dual Plated For 190/380V 50 Hertz, Next Lower Horsepower
- Oversized Connection Diagram, "CE" Mark On Nameplate
Each motor is brand new and drop ships straight from the factory, complete with manufacturer's warranty.
SPECS:
- Motor Phase 3 ph
- Motor Horsepower 25 hp
- Synchronous Rpm 1800 rpm
- Country of Origin MEX
- Motor Supply Voltage 200/400 V
- Frame Size 284TS
- Enclosure Type ODP (Open Drip-Proof)
- Frequency Rating 60 Hz
- Base RPM 1775 rpm
- Duty Condition Type Continuous Duty
- Mounting Type Horizontal / Foot
- Full Load Efficiency 91.7 %
- Motor Poles 4
- Description U.S. motors® brand fire pump products are fully compliant with federal motor efficiency requirements as described in the Energy Independence and Security Act of 2007 (EISA). All fire pump motors provide necessary identifying nameplate data.
- Description Keyword 25 hp
- Shaft Diameter 1.6250 in
- Overall Length C Dimension 23.5 in
- NEMA Design Class B
- Service Factor 1.15
- Frame Material Steel
- Insulation Class F
- Standards Met EE
- Weight 300 lbs
- Harmonization Code 8501.52.8000
- Manufacturer Upc Number 786382096427
- UPC_NO 786382096427
- Manufacturer Product Page Click here
- Model DB99
- Motor Category Fire Pump Motor
- Wiring Diagram Click here
- 2D Drawing Click here
- Max Allowable Current 35 A, 70 A
- Product Types AC Motors
- Torque 73.9 ft-lbs
- Opposite Drive End Bearing 6210-2Z-J/C3
- Product Type General Purpose Motors
