HSQ1102 Century Motor 1HP 3450RPM 56Y ODP 115/208-230Volt 1Phase
- Description
- Specifications
Century HSQ1102 is your replacement pool motor for Hayward TriStarl motors which offer energy efficient operation thanks to the capacitor start/capacitor run full rate design. Century's line of TriStar replacement motors offer reliable "like for like" replacement for in-ground pool applications. Other Features:
- Square Flange
- Full Rate
- No Base
- 60 Hz
- Energy Efficient
- Ball Bearing
- Single Speed
- Capacitor Start/Capacitor Run
- Insulation Class F
- Open Drip Proof
- 60°C Ambient
- Single Phase
- Threaded Shaft
- Cross Reference: SP3210Z1BE
- ALTERNATE PART #'S 196336, 7-196336-20, HSQ1102, SP3210Z1BE, SP3210Z1BER, SPX3210Z1BER, T63CXDCY-1652, 35-150-1530, HAYSPX3210Z1BER
Please Note: If replacing another brand or model, remember that you need to buy at least the same level of total output (horsepower x service factor) if not more.
Important pump safety note: Century HSQ1102 is NOT equipped with a Safety Vacuum Release System (SVRS), which helps prevent drowning by turning off the pump if someone gets caught in the suction. There are other models with this feature if you need it.
Go to www.centuryelectricmotor.com for great technical support; there you will find motor specification, dimension drawings, and wiring diagrams. Please Contact Square One Electric if you can't find what you need.
Nameplate Specifications
| Phase: | 1 | Output HP: | 1.0 Hp |
| Output KW: | 0.75 kW | Voltage: | 230/115 V |
| Speed: | 3450 rpm | Service Factor: | 1.85 |
| Frame: | Y56Y | Enclosure: | Open Drip Proof |
| Thermal Protection: | Thermally Protected | Ambient Temperature: | 60 °C |
| Frequency: | 60 Hz | Current: | 8.8-7.5/15.0 A |
| Duty: | Continuous | Insulation Class: | F |
| UL: | Recognized | CSA: | Y |
Technical Specifications
| Electrical Type: | Capacitor Start, Capacitor Run, Single Or Dual Voltage | Poles: | 2 |
| Rotation: | Counterclockwise Pump End | Mounting: | Square Flange |
| Motor Orientation: | Horizontal | Drive End Bearing: | BALL |
| Opp Drive End Bearing: | BALL | Frame Material: | Rolled Steel |
| Shaft Type: | 1/2 THREADED | Overall Length: | 13.39 in |
| Frame Length: | 9.00 in | Shaft Diameter: | 0.625 in |
| Shaft Extension: | 0.91 in |
General Specifications
| UPC: | 786674025210 | Weight: | 33.00 LB |
| Packaged Length: | 16.00 IN | Packaged Width: | 9.50 IN |
| Packaged Height: | 11.00 IN | HTC: | 8501.40.6040 |
| Country of Origin: | Mexico |
