ZDVSNM3661T Baldor Motor 3HP 1800RPM 182TC TENV 230/460 Volt 3 Phase 06H929X370Z1

ZDVSNM3661T: Baldor, 3HP,1800RPM, 3PH, 182TC, TENV

Baldor Inverter/Vector Totally Enclosed Fan Cooled Motors used on Conveyors, extruders, printing lines, converting, test stands, anywhere constant torque is required over a wide speed range

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 06H929X370Z1

Catalog Number    ZDVSNM3661T
Enclosure    TENV
Frame    182TC
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    3.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CSA
UR
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    4.300 A @ 460.0 V
8.600 A @ 230.0 V
Design Code    A
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    89.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Enclosure Modification    Severe Duty Features
Feedback Device    ENCODER
Front Face Code    Encoder/Feedback Device
Front Shaft Indicator    No Key Or Flat
Heater Indicator    No Heater
High Voltage Full Load Amps    4.3 a
Insulation Class    F
Inverter Code    Inverter Duty
KVA Code    L
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    6000 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 16 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0636M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    17.85 IN
Power Factor    73
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS NON-COMPLIANT
Service Factor    1.00
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1760 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Normally Closed Thermostat
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None