YPC144A Baldor Motor 1/4HP 1625RPM 48YZ TEAO 115 Volt 1 Phase 34M195R234G1

YPC144A Baldor Fan Motor at Wholesale Prices 

Specification # 34M195R015G1

Baldor's new Light Industrial / Commercial Motor line offers many ratings designed for applications with low to medium starting torque requirements. The Baldor Light Industrial / Commercial Motor line brings Baldor's reputation for high quality designs to commercial applications with a cost-effective offering. This definite purpose product line is designed for certain applications requiring NEMA 48 and 56 motors rated between 1/4 and 1 1/2 HP, in both single and three phase ratings. Typical applications include: Jet Pump, Heating and Cooling, Ventilation, Air Conditioning, Blowers, Direct Drive Fans, Condenser Fans, and Pedestal Fans.  

Catalog Number    YPC144A
Enclosure    TEAO
Frame    48YZ
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Oil Capacitor Start and Run
Output @ Frequency    .250 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Yoke Pedestal
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    2.500 A @ 115.0 V
Design Code    -
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    67.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Terminal Panel
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    2.5 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    -
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Terminal Panel Or Lead Hole
Motor Lead Quantity/Wire Size    5 @ 18 AWG
Motor Lead Termination    None
Motor Standards    NEMA
Motor Type    3408C
Mounting Arrangement    F1
Number of Poles    4
Overall Length    10.68 IN
Power Factor    98
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS NON-COMPLIANT
Service Factor    1.00
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible: Connected Standard
Shaft Slinger Indicator    Shaft Slinger
Speed    1625 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    WG
Winding Thermal 2    None