VLECP3774T Baldor Motor 10HP 1760RPM 215LP TEFC 208-230/460 Volt 3 Phase 07H347X776G1

VLECP3774T Baldor Electric Motor 10HP 1760RPM 3PH 60HZ 215LP 0731M TEFC F

This Baldor electric motor is for medium and high thrust in-line pump applications. Waste water treatment plants, Petro-Chemical industries, pulp and paper mills and agricultural irrigation applications.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 07H347X761H1

Catalog Number    VLECP3774T
Enclosure    TEFC
Frame    215LP
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    CLI GP A,B,C,D
Haz Area Division    Division II
Motor Letter Type    Three Phase
Output @ Frequency    10.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    NEMA_PREMIUM
UR
CSA EEV
CCSA US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Constant Torque Speed Range    1.3
Current @ Voltage    12.500 A @ 460.0 V
25.000 A @ 230.0 V
Design Code    A
Drip Cover    Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    92.4 %
Electrically Isolated Bearing    Not Electrically Isolated
Enclosure Modification    841
Feedback Device    NO FEEDBACK
Front Face Code    Drip Cover Mounting
Front Shaft Indicator    None
Haz Area Temp Code    T3C
Heater Indicator    No Heater
High Voltage Full Load Amps    12.5 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    H
Lifting Lugs    Vertical Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    2700 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 14 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0748M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    22.51 IN
Power Factor    82
Product Family    Super-E Chemical Processing
Pulley End Bearing Type    Thrust
Pulley Face Code    P-Base
Pulley Shaft Indicator    P-Base Groove & Key
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1760 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None