VLECP3663T Baldor Motor 5HP 3450RPM 184LP TEFC 230/460 Volt 3 Phase 06F063W730G1

Baldor Pump Totally Enclosed Fan Cooled Motors used for medium and high thrust in-line pump applications. Waste water treatment plants, Petro-Chemical industries, pulp and paper mills and agricultural irrigation applications

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 06F063W812H1

Catalog Number    VLECP3663T
Enclosure    TEFC
Frame    184LP
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    CLI GP A,B,C,D
Haz Area Division    Division II
Motor Letter Type    Three Phase
Output @ Frequency    5.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    NEMA_PREMIUM
UR
CSA EEV
CCSA US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Constant Torque Speed Range    6
Current @ Voltage    11.400 A @ 230.0 V
5.700 A @ 460.0 V
Design Code    A
Drip Cover    Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    90.2 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Haz Area Temp Code    T3C
Heater Indicator    No Heater
High Voltage Full Load Amps    5.7 a
Insulation Class    F
Inverter Code    Inverter Duty
KVA Code    M
Lifting Lugs    Vertical Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    5400 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 16 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0632M
Mounting Arrangement    F1
Number of Poles    2
Overall Length    22.18 IN
Power Factor    90
Product Family    Super-E Chemical Processing
Pulley End Bearing Type    Thrust
Pulley Face Code    P-Base
Pulley Shaft Indicator    P-Base Groove & Key
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3490 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None