Home » VL3510 Baldor Motor 1HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase35C13X945
VL3510 Baldor Motor 1HP 1725RPM 56C TEFC 1 Phase 35C13X945

* Image is for reference only

VL3510 Baldor Motor 1HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase35C13X945

SKU: VL3510
Sale
Description

Specification # 35C13X945

Baldor VL3510 Motor is a sturdy motor that is used for pumps, fans, conveyors, machine tools, and gear reducers. Baldor motors and parts are reliable and made in the USA.

 

Baldor VL3510 Motor features include:

• Locked DE bearing to allow mounting in any configuration

• Low noise vibration dampening base

• Dynamically balanced rotor to increase bearing life

• Superior switch design provides optimized torque profiles

• Robust heavy gauge steel design

 SPECS:
Catalog Number VL3510 Enclosure TEFC Frame 56C Frame Material Steel Frequency 60.00 Hz Haz Area Class and Group None Haz Area Division Not Applicable Motor Letter Type Cap Start, Induction Run Output @ Frequency 1.000 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 115.0 V @ 60 HZ 230.0 V @ 60 HZ Agency Approvals C UR US Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 12.500 A @ 115.0 V 6.300 A @ 230.0 V Design Code L Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 74.0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater High Voltage Full Load Amps 6.3 a Insulation Class F Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3528L Mounting Arrangement F1 Number of Poles 4 Overall Length 13.25 IN Power Factor 69 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.15 Shaft Diameter 0.625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1750 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None
Nameplate:
CAT.NO. VL3510
SPEC. 35C13G376
HP 1
VOLTS 115/230
AMP 12.5/6.3
RPM 1750
FRAME 56C HZ 60 PH 1
SER.F. 1.15 CODE L DES L CLASS F
NEMA-NOM-EFF 74 PF 69
RATING 40C AMB-CONT
CC
DE 6205 ODE 6203
ENCL TEFC SN
SFA 13.9/6.95
NP1256L