VHECP4108T Baldor Motor 30HP 3520RPM 286HP TEFC 208-230/460 Volt 3 Phase 09G614T474

VHECP4108T Baldor Electric Motor 30HP 3520RPM 3PH 60HZ 286HP 0954M TEFC

Baldor Electric motor for medium and high thrust in-line pump applications. Waste water treatment plants, Petro-Chemical industries, pulp and paper mills and agricultural irrigation applications.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 09G614Y356

Catalog Number    VHECP4108T
Enclosure    TEFC
Frame    286HP
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    30.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    NEMA_PREMIUM
UR
CURUSEEV
CSA EEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    68.000 A @ 230.0 V
74.000 A @ 208.0 V
34.000 A @ 460.0 V
Design Code    A
Drip Cover    Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    91.7 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    34.0 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    J
Lifting Lugs    Vertical Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 10 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0950M
Mounting Arrangement    F1
Number of Poles    2
Overall Length    26.11 IN
Power Factor    89
Product Family    Super-E Chemical Processing
Pulley End Bearing Type    Ball
Pulley Face Code    P-Base
Pulley Shaft Indicator    P-Base Groove & Key
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    Shaft Slinger
Speed    3520 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None