VHECP3769T Baldor Pump Motor 7.5HP 3525RPM 213HP TEFC 208-230/460 Volt 3 Phase 07K215Y328G1

VHECP3769T Baldor Electric Motor 7.5HP 3525RPM 3PH 60HZ 213HP 0733M TEFC

Baldor Electric motor for medium and high thrust in-line pump applications. Waste water treatment plants, Petro-Chemical industries, pulp and paper mills and agricultural irrigation applications.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 07K215W280

Catalog Number    VHECP3769T
Enclosure    TEFC
Frame    213HP
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    7.500 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
460.0 V @ 60 HZ
Agency Approvals    CSA EEV
CURUSEEV
NEMA_PREMIUM
UR
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    9.000 A @ 460.0 V
18.000 A @ 230.0 V
Design Code    B
Drip Cover    Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    89.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Drip Cover Mounting
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    9.0 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    H
Lifting Lugs    Vertical Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 14 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0726M
Mounting Arrangement    F1
Number of Poles    2
Overall Length    22.51 IN
Power Factor    86
Product Family    Chemical Processing (Not DC)
Pulley End Bearing Type    Ball
Pulley Face Code    P-Base
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.15
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3510 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None