Home » VFDL3510M Baldor Motor 1HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase 35E2335S245G1
VFDL3510M Baldor Motor 1HP 1725RPM 56C TEFC 1 Phase 35E2335S245G1

* Image is for reference only

VFDL3510M Baldor Motor 1HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase 35E2335S245G1

SKU: VFDL3510M
Sale
Description

Specification # 35L596S245

Baldor is a reliable source of single phase electric motors for use on the farm and with standard industrial jobs. Built to last, these durable units come with features that minimize motor failure, including:

  • Seal,slinger, and gasketed conduit boxes to keep moisture out
  • Drain holes to release moisture before windings short
  • Quality ball bearings packed with high temperature grease

Contact Us for more motor information and diagrams.

Specs
Catalog NumberVFDL3510M EnclosureTEFC Frame56C Frame MaterialSteel Frequency60.00 Hz Haz Area Class and GroupNone Haz Area DivisionNot Applicable Motor Letter TypeCap Start, Induction Run Output @ Frequency1.000 HP @ 60 HZ Phase1 Synchronous Speed @ Frequency1800 RPM @ 60 HZ Voltage @ Frequency115.0 V @ 60 HZ
230.0 V @ 60 HZ Agency ApprovalsC UR US Ambient Temperature40 °C Auxillary BoxNo Auxillary Box Auxillary Box Lead TerminationNone Base IndicatorNo Mounting Bearing Grease TypePolyrex EM (-20F +300F) BlowerNone Current @ Voltage12.600 A @ 115.0 V
6.300 A @ 230.0 V Design CodeL Drip CoverNo Drip Cover Duty RatingCONT Efficiency @ 100% Load68.0 % Electrically Isolated BearingNot Electrically Isolated Feedback DeviceNO FEEDBACK Front Face CodeStandard Front Shaft IndicatorNone Heater IndicatorNo Heater High Voltage Full Load Amps6.3 a Insulation ClassF Inverter CodeNot Inverter KVA CodeL Lifting LugsNo Lifting Lugs Locked Bearing IndicatorLocked Bearing Motor Lead ExitKo Box Motor Lead Quantity/Wire Size6 @ 18 AWG Motor Lead TerminationFlying Leads Motor StandardsNEMA Motor Type3524L Mounting ArrangementF1 Number of Poles4 Overall Length13.23 IN Power Factor74 Product FamilyGeneral Purpose Product TypeFARM DUTY Pulley End Bearing TypeSealed Bearing Pulley Face CodeC-Face Pulley Shaft IndicatorStandard Rodent ScreenNone Service Factor1.15 Shaft Diameter0.625 IN Shaft Extension LocationPulley End Shaft Ground IndicatorNo Shaft Grounding Shaft RotationReversible Shaft Slinger IndicatorShaft Slinger Speed1740 rpm Speed CodeSingle Speed Starting MethodDirect on line Thermal Device - BearingNone Thermal Device - WindingNone Vibration Sensor IndicatorNo Vibration Sensor Winding Thermal 1Manual Thermal Overload Winding Thermal 1 LocationKO Winding Thermal 2None
Nameplate
CAT.NO. VFDL3510M
SPEC. 35E2335G385G1
HP 1
VOLTS 115/230
AMP 12.6/6.3
RPM 1740
FRAME 56C HZ 60 PH 1
SER.F. 1.15 CODE L DES L CL F
NEMA-NOM-EFF 68 PF 74
RATING 40C AMB-CONT
CC
DE 6205 ODE 6203
ENCL TEFC SN
NP1280L