Home » UCL1015 Baldor Motor 10-15HP 3450RPM 215Z OPEN 230 Volt 1 Phase 37M291W198
UCL1015 Baldor Motor 10-15HP 3450RPM 215Z OPEN 1 Phase 37M291W198

* Image is for reference only

UCL1015 Baldor Motor 10-15HP 3450RPM 215Z OPEN 230 Volt 1 Phase 37M291W198

SKU: UCL1015
Sale
Description

  Specification # 37E765W198

Baldor Reliance motors have long been a trusted tool for the farm. Whether you’re handling wheat, barley, soybeans, corn, or another crop, these industrial crop dryer units are ideal for drying and storage use. These electric motors are also used for vane axial fans, such as those found in tunnel ventilations, garage exhausts, HVAC systems, and clean rooms. Features include:

  • 3/4” longer shaft - keyed, drilled & tapped with internal ¼-20 tap 1”
  • Internal thermostats for temperature monitoring
  • TEAO (enclosed) motors with sealed bearings, seals, and slingers to stop moisture

Square One Electric is an authorized Delaware Baldor distributor with access to nationwide warehouses. Contact Us if you need more information, replacement motor parts, or connection diagrams. 

Specs
Catalog NumberUCL1015 EnclosureODP Frame215Z Frame MaterialSteel Frequency60.00 Hz Haz Area Class and GroupNone Haz Area DivisionNot Applicable Motor Letter TypeCap Start, Cap Run Output @ Frequency15.000 HP @ 60 HZ
10.000 HP @ 60 HZ Phase1 Synchronous Speed @ Frequency3600 RPM @ 60 HZ Voltage @ Frequency230.0 V @ 60 HZ Agency ApprovalsUR
CSA Ambient Temperature40 °C Auxillary BoxNo Auxillary Box Auxillary Box Lead TerminationNone Base IndicatorRigid Bearing Grease TypePolyrex EM (-20F +300F) BlowerNone Current @ Voltage45.000 A @ 230.0 V Design CodeL Drip CoverNo Drip Cover Duty RatingCONT Efficiency @ 100% Load84.0 % Electrically Isolated BearingNot Electrically Isolated Feedback DeviceNO FEEDBACK Front Face CodeStandard Front Shaft IndicatorNone Heater IndicatorNo Heater High Voltage Full Load Amps45.0 a Insulation ClassF Inverter CodeNot Inverter KVA CodeG Lifting LugsStandard Lifting Lugs Locked Bearing IndicatorLocked Bearing Motor Lead ExitPipe Or Pipe Adaptor Motor Lead Quantity/Wire Size2 @ 8 AWG, A PH Motor Lead TerminationFlying Leads Motor StandardsNEMA Motor Type3744LC Mounting ArrangementF1 Number of Poles2 Overall Length17.81 IN Power Factor89 Product FamilyGeneral Purpose Product TypeFARM DUTY Pulley End Bearing TypeSealed Bearing Pulley Face CodeStandard Pulley Shaft IndicatorTapped & Key Rodent ScreenIncluded Service Factor1.00 Shaft Diameter1.125 IN Shaft Extension LocationPulley End Shaft Ground IndicatorNo Shaft Grounding Shaft RotationReversible Shaft Slinger IndicatorNo Slinger Speed3450 rpm Speed CodeSingle Speed Starting MethodDirect on line Thermal Device - BearingNone Thermal Device - WindingNormally Closed Thermostat Vibration Sensor IndicatorNo Vibration Sensor Winding Thermal 1None Winding Thermal 2None
Nameplate
CAT.NO. UCL1015
SPEC. 37M291W198
HP 10-15 AIR OVER
VOLTS 230
AMP 45-64
RPM 3450
FRAME 215Z HZ 60 PH 1
SER.F. 1.00 CODE G DES L CL F
NEMA-NOM-EFF 84 PF 89
RATING 40C AMB-CONT
CC
DE 6307 ODE 6206
ENCL OPEN SN
NP1279L
CAT.NO. UCL1015
SPEC. 37M291W198
HP 10-15 AIR OVER
VOLTS 230
AMP 45-64
RPM 3450
FRAME 215Z HZ 60 PH 1
SER.F. 1.00 CODE G DES L CL F
NEMA-NOM-EFF 84 PF 89
RATING 40C AMB-CONT
CC
DE 6307 ODE 6206
ENCL OPEN SN
NP1263L