RL1323A Baldor Motor 1/2HP 1725RPM 56 OPEN 115/230 Volt 1 Phase 34K18W140

Specification # 34K18W140 

Baldor motor RL1323A includes a Heavy-Gauge steel base, ball bearings, and is suitable for mounting in any position. Dynamically balanced rotors for reduced vibration and quiet operation. 

Square One’s selection of fan motors holds many reliable options for your applications! 

Catalog Number    RL1323A
Enclosure    ODP
Frame    56
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    .500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Resilient
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    4.000 A @ 230.0 V
8.000 A @ 115.0 V
Design Code    N
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    62.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Resilient Mount
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    4.0 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Terminal Panel
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3416L
Mounting Arrangement    F1
Number of Poles    4
Overall Length    10.97 IN
Power Factor    71
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Resilient Mount
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.00
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible: Connected Standard
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    SB
Winding Thermal 2    None