XEFRPM21104 Baldor X-Efficient 10HP 1800RPM FL215T TEFC 460 Volt 3 Phase H21-A000-0001

Baldor Reliance has developed a new product that combines permanent magnet with induction technology. The result? A super energy efficient motor that performs two to four bands ABOVE the NEMA premium efficiency sine wave power.

Available in standard NEMA frame for easy, drop-in motor replacement, or a power dense design, these groundbreaking Baldor XE extreme Efficiency Motors provide the ultimate in low operating costs through energy savings. The uber fin aluminum frame dissipates heat like no other. Ideal for the steel, paper, and pulp industries; they run at 42-65 degrees C compared to standard 80-105 deg. C in other motors, these new motors are popular for centrifugal pump and fan applications.

More XEFRPM18204 features include:

• Across the line operation design
• Safe to use with a Variable Frequency Drive
• Enjoy true synchronous speed regardless of load
• Aluminum frame construction allows greater heat dissipation and cooler operation
• Severe Duty features and meets IP55 rating

Check out the RPM XE Nominal Efficiency vs NEMA Premium Efficiency (%)

Buy Baldor Electric Motors for the best American made quality equipment on the market!

Catalog Number    XEFRPM21104
Enclosure    TEFC
Frame    HL215T
Frame Material    Exposed Laminations
Frequency    60.00 Hz
Motor Letter Type    CP
Output @ Frequency    10.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
Agency Approvals    CCSA US
NEMA_PREMIUM
Auxillary Box    No Auxillary Box
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Constant Torque Speed Range    1-60
Current @ Voltage    10.000 A @ 460.0 V
Duty Rating    CONT
Feedback Device    NO FEEDBACK
Frame Prefix    HL
Heater Indicator    No Heater
High Voltage Full Load Amps    10.0 a
Insulation Class    H
IP Rating    IP54
KVA Code    G
Motor Standards    NEMA
Mounting Arrangement    F1
Overall Length    21.72 IN
Product Family    Fan - Centrifugal
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Service Factor    1.15
Shaft Diameter    1.375 IN
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Speed    1800 rpm
Thermal Device - Bearing    None
Thermal Device - Winding    Normally Closed Thermostat