Home » PCL3514M Baldor Motor 1.5HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase 35K358Y860
PCL3514M Baldor Motor 1.5HP 1725RPM 56C TEFC 1 Phase 35K358Y860

* Image is for reference only

PCL3514M Baldor Motor 1.5HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase 35K358Y860

SKU: PCL3514M
$918.60
$1,531.00 Sale $918.60

PCL3514M Baldor Definite Purpose Motor used for pressure washers, steam cleaners, portable and self contained stationary system for direct drive mount and coupled mount designs

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 35K358Y860

Catalog Number    PCL3514M
Enclosure    TEFC
Frame    56C
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    1.500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    C UR US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    13.000 A @ 115.0 V
6.500 A @ 230.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    80.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    6.5 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    4 @ 16 AWG, A&J
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3535LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    14.10 IN
Power Factor    95
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1750 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Do Not Use
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Manual Thermal Overload
Winding Thermal 1 Location    KO
Winding Thermal 2    None

CAT.NO. PCL3514M
SPEC. 35K358Z997
HP 1.5
VOLTS 115/230
AMP 13/6.5
RPM 1750
FRAME 56C HZ 60 PH 1
SER.F. 1.15 CODE J DES L CL F
NEMA-NOM-EFF 80 PF 95
RATING 40C AMB-CONT
CC
DE 6205 ODE 6203
ENCL TEFC SN
NP1257L

Product Attachments

PCL3514M Product Packet
PCL3514M Product Packet