PCL1327M Baldor Motor 5HP 3450RPM 56HCY ODTF 230 Volt 1 Phase 35L263S322

Catalog Number    PCL1327M
Enclosure    ODTF
Frame    56HCY
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    5.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
Agency Approvals    C UR US
CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    23.000 A @ 230.0 V
24.000 A @ 208.0 V
Design Code    -
Drip Cover    Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    74.2 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Drip Cover Mounting
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    23.0 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    F
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Cap Box
Motor Lead Quantity/Wire Size    2 @ 12 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3535LC
Mounting Arrangement    F1
Number of Poles    2
Overall Length    14.10 IN
Power Factor    95
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.00
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Do Not Use
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Manual Thermal Overload
Winding Thermal 1 Location    KO
Winding Thermal 2    None