NM3454 Baldor Motor 1/4HP 1725RPM 48 TENV 208-230/460 Volt 3 Phase 34A75-139G1

 Specification # 34A75-139G1

Baldor NM3454 Motor is a premium machine that is used for Fans, Pumps, Blowers, Conveyors, Compressors, Industrial Machines, and other General Purpose Applications.  Baldor motors and parts are reliable and made in the USA.

 Baldor NM3454 Motor features include:

• 60 Hz designs with 50 Hz information on 2,4,6 Pole 1-125 Hp ratings
• Suitable for Inverter use per NEMA MG1 Part 31.4.4.2
• Simple F1 to F2 conversion on cast iron frames
• Designed for longevity with a 3 year warranty on premium efficient Super-E® Motors

Catalog Number    NM3454
Enclosure    TENV
Frame    48
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    .250 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
460.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    .500 A @ 460.0 V
1.000 A @ 230.0 V
1.060 A @ 208.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    68.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    0.5 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    K
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3413M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    9.62 IN
Power Factor    66
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.35
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None