L3608T Baldor Motor 5HP 3450RPM 184T TEFC 230 Volt 1Phase 36E04W914

Baldor L3608T motor is an energy efficient and reliable motor used for general purpose including compressors, pumps, fans, farm equipment, conveyors, material handling equipment, machine tools, etc. Baldor motors and parts are exceptionally built to last and are made in the USA.

Baldor L3608T motor features include:

• Low noise vibration dampening base

• Dynamically balanced rotor to increase

bearing life

• Superior switch design provides optimized

torque profiles

• Robust heavy gauge steel design

Catalog Number    L3608T
Enclosure    TEFC
Frame    184T
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    5.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    19.500 A @ 230.0 V
22.000 A @ 208.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    83.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    19.5 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    G
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    2 @ 14 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3640LC
Mounting Arrangement    F1
Number of Poles    2
Overall Length    18.06 IN
Power Factor    99
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.00
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None

Baldor Motor Parts, Diagrams and Specs Available! For technical support or motor connection diagrams contact Square One Electric at (302) 678-0400.

Specification # 36E04W914