L3405 Baldor Motor 1/3HP 3450RPM 48 TEFC 115/208-230 Volt 1 Phase 34C51-183

Specification # 34C51-183

Baldor single phase 1/3 hp motors can be used for a lot of jobs, from compressor motor to fan condenser motor. Baldor Electric is a widely recognized name in the industrial equipment industry; they have built a strong reputation upon value, quality, and service. They are constantly improving their products based on industry demands and customer feedback. This AC motor features:

• Usable at 208 Volts
• TEFC encl
• Capacitor start, induction run motor
• Steel frames and strong welded base 
• Ball bearings with limited warranty
• Starting switch 

Catalog Number    L3405
Enclosure    TEFC
Frame    48
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    .330 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
208.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    3.000 A @ 230.0 V
3.200 A @ 208.0 V
3.700 A @ 208.0 V
6.000 A @ 115.0 V
Design Code    N
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    55.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    3.0 a
Insulation Class    B
Inverter Code    Not Inverter
IP Rating    NONE
KVA Code    K
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3413L
Mounting Arrangement    F1
Number of Poles    2
Overall Length    10.72 IN
Power Factor    68
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.35
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None