L1508T Baldor Motor 5HP 1745RPM 213T OPSB 230 Volt 1 Phase 37K214T912

Baldor L1508T Motor is a reliable motor that is used for Air Handling, Material Handling, Machine Tools, Conveyors, Pumps, and Fans. Baldor motors and parts are built to last and made in the USA. Specification # 37K214T912

Baldor L1508T Motor features include:

• Low noise vibration dampening base

• Dynamically balanced rotor to increase bearing life

• Superior switch design provides optimized torque profiles

• Robust heavy gauge steel design

• Optimized airflow design providing higher horsepower in a smaller package

Catalog Number    L1508T
Enclosure    ODP
Frame    213T
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    5.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    27.000 A @ 230.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    77.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    27.0 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    G
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    2 @ 12 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3727L
Mounting Arrangement    F1
Number of Poles    4
Overall Length    16.32 IN
Power Factor    78
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.375 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None