JSL725A Baldor Motor 2HP 3450RPM 56YZ OPEN 115/208-230 Volt 1 Phase 35E2011L467G1

Baldor motor for commercial pumps, residential pumps and swimming pool pumps, etc.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 19E183W258

Catalog Number    JSL725A
Enclosure    OPSB
Frame    56YZ
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    2.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    C UR US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    11.000 A @ 230.0 V
13.300 A @ 208.0 V
22.000 A @ 115.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    74.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Terminal Panel
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    11.0 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Terminal Panel
Motor Lead Quantity/Wire Size    4 @ 14 AWG, A&J
Motor Lead Termination    None
Motor Standards    NEMA
Motor Type    3528L
Mounting Arrangement    F1
Number of Poles    2
Overall Length    14.81 IN
Power Factor    81
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Pool Pump
Pulley Shaft Indicator    Ext Thread & Tapped Hole
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.20
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Fixed Opposite Standard
Shaft Slinger Indicator    Shaft Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    EP
Winding Thermal 2    None