JMEWDM3711T Baldor Pump Motor 10HP 3450RPM 215JM TENV 208-230/460 Volt 3 Phase 37H883R697G1

JMEWDM3711T Replaces JMWDM3711T

This Baldor electric motor is used for commercial and industrial water pumps, food processing and applications where motor is exposed to high pressure washdown.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 37H883T223H1

Catalog Number    JMEWDM3711T
Enclosure    TEFC
Frame    215JM
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    10.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
NEMA_PREMIUM
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    21.600 A @ 230.0 V
24.000 A @ 208.0 V
10.800 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    90.2 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    10.8 a
Insulation Class    F
Inverter Code    Inverter Ready
IP Rating    NONE
KVA Code    H
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 14 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3736M
Mounting Arrangement    F1
Number of Poles    2
Overall Length    20.91 IN
Power Factor    96
Product Family    Wash Down
Pulley End Bearing Type    Sealed Bearing
Pulley Face Code    C-Face
Pulley Shaft Indicator    Tapped & Key
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    Shaft Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None