Home » JL3514A Baldor Motor 1.5HP 1725RPM 56J TEFC 115/208-230 Volt 1 Phase 35F974W159
JL3514A Baldor Motor 1.5HP 1725RPM 56J TEFC 1 Phase 35F974W159

* Image is for reference only

JL3514A Baldor Motor 1.5HP 1725RPM 56J TEFC 115/208-230 Volt 1 Phase 35F974W159

SKU: JL3514A
$721.20
$1,202.00 Sale $721.20

Specification # 35F974W159

Baldor JL3514A jet pump motors are designed for residential and industrial pump applications. Construction features include a sturdy steel frame, cast aluminum end plates with steel bearing seat inserts for mechanical reliability. Opposite drive end shaft is slotted for convenience. 

Check out Square One’s selection of residential and industrial pumps pump motors for your applications! 

Catalog Number    JL3514A
Enclosure    TEFC
Frame    56J
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    1.500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    C UR US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    13.400 A @ 115.0 V
6.700 A @ 230.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    80.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    6.7 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    H
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    4 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3532LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    14.60 IN
Power Factor    90
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Ext Thread
Rodent Screen    None
Service Factor    1.00
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Fixed Opposite Standard
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Do Not Use Eve-Not Valiid
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    SB
Winding Thermal 2    None

CAT.NO. JL3514A
SPEC. 35F974G377
HP 1.5
VOLTS 115/230
AMP 13.4/6.7
RPM 1725
FRAME 56J HZ 60 PH 1
SER.F. 1.00 CODE H DES L CL F
NEMA-NOM-EFF 80 PF 90
RATING 40C AMB-CONT
CC
DE 6205 ODE 6203
ENCL TEFC SN
NP1257L

Product Attachments

JL3514A Product Packet
JL3514A Product Packet