JL3405A Baldor Motor 1/3HP 3450RPM 56J TEFC 115/208-230 Volt 1 Phase 34-3099X609

Baldor pump motor for residential and industrial pumps, swimming pool pumps, etc.

Specification # 34-3099X609

Catalog Number    JL3405A
Enclosure    TEFC
Frame    56J
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    .330 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    C UR US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    No Mounting
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    3.000 A @ 208.0 V
3.000 A @ 230.0 V
6.000 A @ 115.0 V
Design Code    N
Drip Cover    No Drip Cover
Duty Rating    CONT
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    3.0 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    M
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    4 @ 18 AWG, A&J
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3416L
Mounting Arrangement    F1
Number of Poles    2
Overall Length    11.85 IN
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Ext Thread
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.75
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Fixed Opposite Standard
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    SB
Winding Thermal 2    None