Home » GDL1607T Baldor Motor 7.5HP 1725RPM 215TZ ODTF 230 Volt 1 Phase 37M320-1630G1
GDL1607T Baldor Motor 7.5HP 1725RPM 215TZ ODTF 1 Phase 37M320-1630G1

* Image is for reference only

GDL1607T Baldor Motor 7.5HP 1725RPM 215TZ ODTF 230 Volt 1 Phase 37M320-1630G1

SKU: GDL1607T
$1,811.37
$2,868.00 Sale $1,811.37
Description

Specification # 37F480-1630

Baldor Reliance motors have long been a trusted tool for the farm. Whether you’re handling wheat, corn, soybeans, or another crop, these industrial crop dryer units are ideal for drying and storage use. These reliable motors are also good for centrifugal fans, or blower units. Features include:

  • Shaft that is 1” longer than NEMA standard
  • ODP (open) motors contain rodent screen
  • Moisture resistant parts like seals, slingers, epoxy paint, and gaskets
Specs
Catalog NumberGDL1607T EnclosureODP Frame215TZ Frame MaterialSteel Frequency60.00 Hz Haz Area Class and GroupNone Haz Area DivisionNot Applicable Motor Letter TypeCap Start, Cap Run Output @ Frequency7.500 HP @ 60 HZ Phase1 Synchronous Speed @ Frequency1800 RPM @ 60 HZ Voltage @ Frequency230.0 V @ 60 HZ Agency ApprovalsCURUS Ambient Temperature40 °C Auxillary BoxNo Auxillary Box Auxillary Box Lead TerminationNone Base IndicatorRigid Bearing Grease TypePolyrex EM (-20F +300F) BlowerNone Current @ Voltage32.000 A @ 230.0 V Design CodeL Drip CoverNo Drip Cover Duty RatingCONT Efficiency @ 100% Load82.5 % Electrically Isolated BearingNot Electrically Isolated Feedback DeviceNO FEEDBACK Front Face CodeStandard Front Shaft IndicatorNone Heater IndicatorNo Heater High Voltage Full Load Amps32.0 a Insulation ClassF Inverter CodeNot Inverter KVA CodeJ Lifting LugsStandard Lifting Lugs Locked Bearing IndicatorLocked Bearing Motor Lead ExitCap Box Motor Lead Quantity/Wire Size2 @ 8 AWG, A PH Motor Lead TerminationFlying Leads Motor StandardsNEMA Motor Type3744LC Mounting ArrangementF1 Number of Poles4 Overall Length22.57 IN Power Factor90 Product FamilyGeneral Purpose Product TypeFARM DUTY Pulley End Bearing TypeSealed Bearing Pulley Face CodeC-Face Pulley Shaft IndicatorStandard Rodent ScreenIncluded Service Factor1.15 Shaft Diameter1.375 IN Shaft Extension LocationPulley End Shaft Ground IndicatorNo Shaft Grounding Shaft RotationReversible Shaft Slinger IndicatorShaft Slinger Speed1725 rpm Speed CodeSingle Speed Starting MethodDirect on line Thermal Device - BearingNone Thermal Device - WindingNormally Closed Thermostat Vibration Sensor IndicatorNo Vibration Sensor Winding Thermal 1None Winding Thermal 2None
Nameplate
CAT.NO. GDL1607T
SPEC. 37M320-1630G1
HP 7.5
VOLTS 230
AMP 32
RPM 1725
FRAME 215TZ HZ 60 PH 1
SER.F. 1.15 CODE J DES L CLASS F
NEMA-NOM-EFF 82.5 PF 90
RATING 40C AMB-CONT
CC
DE 6307 ODE 6206
ENCL ODTF SN
NP1256L