ERL1319A277 Baldor Motor 1.5HP 1725RPM NEMA 56/56H OPEN 277 Volt 1 Phase 35F554L161G1

This item replaces # RL1319A277

Baldor HVAC fan and blower motor with dynamically balanced rotors for reduced vibration and quiet operation.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 35E410X508

Catalog Number    ERL1319A277
Enclosure    OPEN
Frame    56H
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    1.500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    277.0 V @ 60 HZ
Agency Approvals    CURUSEEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Resilient
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    5.200 A @ 277.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    84.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Terminal Panel
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    5.2 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    K
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Terminal Panel
Motor Lead Quantity/Wire Size    2 @ 16 AWG, A PH
Motor Lead Termination    Flying Leads With QC
Motor Standards    NEMA
Motor Type    3540LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    14.67 IN
Power Factor    93
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Resilient Mount
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1760 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    ES
Winding Thermal 2    None