EM30004 Baldor Motor 1/4HP 1140RPM 48 OPEN 208-230/460 Volt 3 Phase 34F002R138G1

Specification # 34F02-5882

Baldor general purpose motors are perfect for a wide range of industrial and commercial jobs. Use in manufacturing, agriculture, water treatment, material handling, building maintenance, or anywhere you want minimal maintenance and premium energy savings.  

Square One Electric is where to buy Baldor motors online. Each motor comes new from the factory with a manufacturer's warranty.  

Baldor three phase motors are built to last with dynamic balanced rotors and quality bearings. To avoid premature motor failure, open drip proof motors require some protection from the elements, dirt, and moisture.  

Catalog Number    EM30004
Enclosure    ODP
Frame    48
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    .250 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1200 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
460.0 V @ 60 HZ
Agency Approvals    CURUSEEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    .700 A @ 460.0 V
1.400 A @ 230.0 V
1.700 A @ 208.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    67.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    0.7 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    N
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3416M
Mounting Arrangement    F1
Number of Poles    6
Overall Length    9.13 IN
Power Factor    48
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.35
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1140 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None