EL3605T Baldor Motor 2HP 1740RPM 184T TEFC 115/208-230 Volt 1 Phase 36E004Y546G1

Baldor EL3605T motor is energy efficient  and built to last with superior performance. Super-E single phase motors are designed to conserve energy over extended time periods. Baldor motors are a premium return on investment and made in the USA.

Baldor EL3605T motor features include:

• Low noise vibration dampening base

• Dynamically balanced rotor to increase bearing life

• Superior switch design provides optimized torque profiles

• Robust heavy gauge steel design

Specification # 36E004Y546G1

Catalog Number    EL3605T
Enclosure    TEFC
Frame    182T
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    2.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    230.0 V @ 60 HZ
115.0 V @ 60 HZ
Agency Approvals    CURUSEEV
NEMA_PREMIUM
UR
CURUS
CSA EEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    17.600 A @ 115.0 V
8.800 A @ 230.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    82.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    8.8 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    4 @ 14 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3623LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    16.56 IN
Power Factor    90
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1740 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None