EL11318 Baldor Motor 1hp 1725 56/56H OPEN 115/208-230 Volt 1 Phase 35E007N264G1

Replaces model L1318 / Specification # 35J384-488

Buy Baldor model EL11318 for a small electrical motor that performs to your expectations. Baldor is a leading motor manufacturer because of their attention to detail, engineering excellence, and high quality construction. This small AC motor can be used in a wide range of general purpose jobs, including on fans, pumps, machinery, tools, and conveyors. The open motor design means that you want to install this machine in an area that doesn’t have a lot of dirt or moisture.

More single phase motor specs include:

• Spec # 35E007N264G1
• Quiet noise levels
• Dynamic balanced rotor for extended bearing life
• Winning switch design
• Solid steel frame
• Optimized airflow for more horsepower in a smaller frame

Catalog Number    EL11318
Enclosure    OPEN
Frame    56H
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    1.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    4.400 A @ 230.0 V
8.800 A @ 115.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    82.6 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    4.4 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    K
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3528LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    11.75 IN
Power Factor    89
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1750 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None