EL11203 Baldor Motor 1/4HP 1725RPM 48 OPEN 115/230 Volt 1 Phase 34F351R064G1

Replaces model L1203 / EL1203 Specification # 34F001S070

Buy Baldor model EL11203 for a quality AC electric motor that will last. Enjoy quiet operation and durability that you expect from Baldor motors. From machine tools to fans and conveyors, this single phase open motor provides:

• Low noise vibration dampening noise
• Dynamically balance rotor for longer bearing life
• Superior switch design
• Strong heavy guage steel frame
• Optimized airflow for higher horsepower in a smaller package

Catalog Number    EL11203
Enclosure    ODP
Frame    48
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    .250 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    1.300 A @ 230.0 V
1.900 A @ 208.0 V
2.600 A @ 115.0 V
Design Code    -
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    68.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    1.3 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    L
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3411LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    9.76 IN
Power Factor    89
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.35
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None