EHM4103T Baldor Motor 25HP 1780RPM 284T TEFC 230/460 Volt 3 Phase 10H756X562G1

EHM4103T Baldor 25HP 1780RPM 3PH 284T TEFC

Baldor HVAC Totally Enclosed Fan Cooled Motors used for Heating, ventilation and air conditioning blower and fan motors.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 10C151X562G1

Catalog Number    EHM4103T
Enclosure    TEFC
Frame    284T
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    25.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
NEMA_PREMIUM
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    60.000 A @ 230.0 V
64.000 A @ 208.0 V
30.000 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    93.6 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    30.0 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    G
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 10 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    1056M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    27.76 IN
Power Factor    82
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Standard
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    1.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    Mounting Provisions Only
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1780 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None