CUHL3519 Baldor Motor 1HP 1725RPM 56C TEFC 115/208-230 Volt 1 Phase 35X061X945G1

CUHL3519 Baldor Electric Motor used for unit and baggage handling, conveyors, packaging equipment, machine tools, hoists, elevators and door operators
 

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 35X061X945G1

Catalog Number    CUHL3519
Enclosure    TEFC
Frame    56C
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    1.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    208.0 V @ 60 HZ
115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CE
CURUS
UKCA
WEEE
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    9.800 A @ 115.0 V
5.100 A @ 208.0 V
4.900 A @ 230.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    78.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    4.9 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    L
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Finish    CLEAR COAT
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    6 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3526LC
Mounting Arrangement    F3
Number of Poles    4
Overall Length    13.23 IN
Power Factor    90
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1745 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None