Specification # 07J564X824H1
Features:
- Severe duty construction for harsh environments
- Corrosion resistant epoxy finish
- Multiple lifting provisions for ease of installation
- Strategically placed drains for optimal moisture removal
- Four barrier shaft sealing system on drive end
- Lipped conduit lid for increased ingress protection
Applications:
- Cooling towers
- Chillers
- Fans
- Pumps
- Air handling
- HVAC systems
- General purpose applications
Catalog NumberCTM3768T
EnclosureTEAO
Frame215T
Frame MaterialCast Iron
Frequency60.00 Hz
Haz Area Class and GroupNone
Haz Area DivisionNot Applicable
Motor Letter TypeThree Phase
Output @ Frequency5.000 HP @ 60 HZ
Phase3
Synchronous Speed @ Frequency1200 RPM @ 60 HZ
Voltage @ Frequency208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ
Agency ApprovalsCURUS
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorRigid
Bearing Grease TypePolyrex EM (-20F +300F)
BlowerNone
Current @ Voltage15.400 A @ 230.0 V
15.900 A @ 208.0 V
7.700 A @ 460.0 V
Design CodeA
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load87.5 %
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNO FEEDBACK
Front Face CodeStandard
Front Shaft IndicatorNone
Heater IndicatorNo Heater
High Voltage Full Load Amps7.7 a
Insulation ClassF
Inverter CodeNot Inverter
KVA CodeK
Lifting LugsVertical Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKo Box
Motor Lead Quantity/Wire Size9 @ 14 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type0736M
Mounting ArrangementF1
Number of Poles6
Overall Length19.54 IN
Power Factor69
Product FamilyChemical Processing (Not DC)
Pulley End Bearing TypeSealed Bearing
Pulley Face CodeStandard
Pulley Shaft IndicatorTapped & Key
Rodent ScreenNone
Service Factor1.15
Shaft Diameter1.375 IN
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorShaft Slinger
Speed1145 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNone
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1None
Winding Thermal 2None
