CNEDM3546T Baldor Motor 1HP 1725RPM 143TC TENV 208-230/460 Volt 3 Phase 35E4320P560G1

CNEDM3546T Baldor Electric Severe Duty Motor 1HP 1725RPM 3PH 143TC TENV

This motor replaces CWAM3546T

Baldor's Severe Duty motors are available from 1 HP to 700 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions. A few typical applications which might require these types of motors include Petro-Chemical plants, mines, foundries, pulp and paper plants, waste management facilities, rock crushers, and chemical plants.

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 35T773P439G1

Catalog Number    CNEDM3546T
Enclosure    TENV
Frame    143TC
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    1.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CSA EEV
CURUSEEV
NEMA_PREMIUM
UR
CCSA US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Constant Torque Speed Range    6
Current @ Voltage    3.340 A @ 230.0 V
3.300 A @ 208.0 V
1.670 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    85.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    1.7 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    M
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    2700 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3522M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    13.23 IN
Power Factor    66
Product Family    Dirty Duty Plus
Pulley End Bearing Type    Sealed Bearing
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1770 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None