CL3711T Baldor Motor 10HP 3450RPM 215TC TEFC 230 Volt 1 Phase 37-0000-0099

Specification # 37F395W578

Baldor CL3711T Motor is a sturdy machine that is used for pumps, fans, conveyors, machine tools, and gear reducers. Baldor motors and parts are reliable and energy efficient. They are built to last and made in the USA.

Baldor CL3711T Motor features include:

• Locked DE bearing to allow mounting in any configuration

• Low noise vibration dampening base

• Dynamically balanced rotor to increase bearing life

• Superior switch design provides optimized torque profiles

• Robust heavy gauge steel design

Catalog Number    CL3711T
Enclosure    TEFC
Frame    215TC
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    10.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    208.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    40.000 A @ 230.0 V
43.000 A @ 208.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    82.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    40.0 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    H
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    2 @ 10 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3744LC
Mounting Arrangement    F1
Number of Poles    2
Overall Length    19.75 IN
Power Factor    98
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.00
Shaft Diameter    1.375 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None