CL3608TM Baldor Motor 5HP 3450RPM 184TC TEFC 230 Volt 1 Phase 36M38W957

Specification # 36M38W957

Baldor CL3608TM Motor is a sturdy  motor that is used for pumps, fans, conveyors, machine tools, and gear reducers. Baldor motors and parts are reliable and built to last. 

Baldor CL3608TM Motor features include:

 • Locked DE bearing to allow mounting in any configuration

 • Low noise vibration dampening base

 • Dynamically balanced rotor to increase bearing life

 • Superior switch design provides optimized torque profiles

 • Robust heavy gauge steel design

Catalog Number    CL3608TM
Enclosure    TEFC
Frame    184TC
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    5.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    3600 RPM @ 60 HZ
Voltage @ Frequency    208.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    19.500 A @ 230.0 V
21.600 A @ 208.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    83.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    19.5 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    G
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    2 @ 14 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3640LC
Mounting Arrangement    F1
Number of Poles    2
Overall Length    18.05 IN
Power Factor    99
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.00
Shaft Diameter    1.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    3450 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Do Not Use
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Manual Thermal Overload
Winding Thermal 1 Location    KO
Winding Thermal 2    None