CL3516TM Baldor Motor 2HP 1725RPM 145TC TEFC 230 Volt 1 Phase 35KK375N678G1

Specification # 35KK375W226

Baldor CL3516TM Motor is a sturdy and reliable machine that is used for pumps, fans, conveyors, machine tools, and gear reducers. Baldor motors and parts are energy efficient and made in the USA.

Baldor CL3516TM Motor features include:

• Locked DE bearing to allow mounting in any configuration

• Low noise vibration dampening base

• Dynamically balanced rotor to increase bearing life

• Superior switch design provides optimized torque profiles

• Robust heavy gauge steel design

Catalog Number    CL3516TM
Enclosure    TEFC
Frame    145TC
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Cap Run
Output @ Frequency    2.000 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    208.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    C UR US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    8.200 A @ 230.0 V
8.900 A @ 208.0 V
Design Code    L
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    78.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    8.2 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    2 @ 16 AWG, A PH
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3535LC
Mounting Arrangement    F1
Number of Poles    4
Overall Length    14.16 IN
Power Factor    99
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1740 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    Do Not Use
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Manual Thermal Overload
Winding Thermal 1 Location    KO
Winding Thermal 2    None