CJL3504A Baldor Motor 1/2HP 1725RPM 56J TEFC 115/208-230 Volt 1 Phase 34L52-5593

Specification # 34-3099-5593

Baldor CJL3504A jet pump motors are designed for residential and industrial pump applications. Construction features include a sturdy steel frame, cast aluminum end plates with steel bearing seat inserts for mechanical reliability. Opposite drive end shaft is slotted for convenience. 

Check out Square One’s selection of residential and industrial pumps pump motors for your applications! 

Catalog Number    CJL3504A
Enclosure    TEFC
Frame    56J
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Cap Start, Induction Run
Output @ Frequency    .500 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    3.700 A @ 230.0 V
4.300 A @ 208.0 V
7.400 A @ 115.0 V
Design Code    N
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    68.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    3.7 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    J
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    4 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3421L
Mounting Arrangement    F1
Number of Poles    4
Overall Length    12.47 IN
Power Factor    66
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Ext Thread
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.25
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Fixed Opposite Standard
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    SB
Winding Thermal 2    None