CHC445A Baldor Motor 3/4HP 1700RPM 56 TEAO 115/208-230 Volt 1 Phase 34M244R059G1

Specification # 34M244R059G1

CHC445A Baldor Electric Motor used for air handling fans, Confinement houses, Exhaust fans, Unit heaters, and other applications having moderate starting loads

Baldor Motor Parts, Diagrams and Specs Available!

Catalog Number    CHC445A
Enclosure    TEAO
Frame    56YZ
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Oil Capacitor Start and Run
Output @ Frequency    .750 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Resilient
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    3.700 A @ 230.0 V
7.400 A @ 115.0 V
Design Code    -
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    74.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Resilient Mount
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    3.7 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    G
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Terminal Panel Or Lead Hole
Motor Lead Quantity/Wire Size    7 @ 18 AWG
Motor Lead Termination    None
Motor Standards    NEMA
Motor Type    3428C
Mounting Arrangement    F1
Number of Poles    4
Overall Length    13.58 IN
Power Factor    92
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Resilient Mount
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.15
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible: Connected Standard
Shaft Slinger Indicator    No Slinger
Speed    1700 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    EP
Winding Thermal 2    None