CHC144A Baldor Motor 1/4HP 1725RPM 48Z TEAO 115/230 Volt 1 Phase 34M212S986G1

CHC144A Baldor Electric Motor 17K043W029 .25HP 1725RPM 1PH 48Z 1712C TEAO

Specification # 34M212S986G1

Baldor HVAC Motor with cradle base for confinement houses, exhaust fans, air handling fans, and unit heaters. Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers. Also included are motors designed especially for use with variable torque electronic controls that are used to conserve electricity. 

Catalog Number    CHC144A
Enclosure    TEAO
Frame    48Z
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Oil Capacitor Start and Run
Output @ Frequency    .250 HP @ 60 HZ
Phase    1
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    115.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUS
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Resilient
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    1.400 A @ 230.0 V
1.500 A @ 208.0 V
2.800 A @ 115.0 V
Design Code    -
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    70.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Resilient Mount
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    1.4 a
Insulation Class    B
Inverter Code    Not Inverter
KVA Code    F
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    No Locked Bearing
Motor Lead Exit    Terminal Panel Or Lead Hole
Motor Lead Quantity/Wire Size    7 @ 18 AWG
Motor Lead Termination    None
Motor Standards    NEMA
Motor Type    3411C
Mounting Arrangement    F1
Number of Poles    4
Overall Length    11.35 IN
Power Factor    81
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    Resilient Mount
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS NON-COMPLIANT
Service Factor    1.00
Shaft Diameter    0.500 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible: Connected Standard
Shaft Slinger Indicator    No Slinger
Speed    1725 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    Automatic Thermal Overload
Winding Thermal 1 Location    WG
Winding Thermal 2    None