CEM3587T Baldor Motor 2HP 1725RPM 145TC TEFC 208-230/460 Volt 3 Phase 05C052X095G1

Buy Baldor CEM3587T for a new premium efficient motor that is built to last. Baldor's Super-E Motors are designed to conserve energy and save you money over time. 

Use in your commercial or industrial applications. Sturdy cast iron, totally enclosed construction for protection from the elements, including dirt and moisture. Use indoors or outdoors. Dynamic balanced rotor provides quiet operation and minimal wear on the shaft and housings. 

More Baldor CEM3587T  motor specs include:

• Specification # 05C052X095G1
• Inverter duty for VFD use
• Quality ball bearings
• C-Flange and rigid base for mounting options
• Reversible rotation

Catalog Number    CEM3587T
Enclosure    TEFC
Frame    145TC
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    2.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
NEMA_PREMIUM
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    5.600 A @ 230.0 V
5.800 A @ 208.0 V
2.800 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    86.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    2.8 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    L
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    0526M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    13.04 IN
Power Factor    76
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1760 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None

Square One is an authorized Baldor distributor. Each motor comes new from the factory with a Baldor warranty.