CEM3558T Baldor Motor 2HP 1755RPM 145TC TEFC 230/460 Volt 3 Phase 35AA002G073G1

Baldor CEM3558T Motor is a sturdy rolled steel motor that can be used for Fans, Pumps, Blowers, Conveyors, Compressors, Industrial Machines and more. Baldor Super E premium efficient motors are designed to consume energy and save you money over time. Enjoy precision performance, low maintenance, and quiet operations with Baldor's quality machines.

Each motor comes new from the factory with Baldor warranty. Square One is an authorized motro distributor with access to warehouses across the country for fast delivery to your door!

Baldor CEM3558T Motor features include:

• Spec# 35AA002M494G1
• Locked DE bearing to allow mounting in any configuration
• 60 Hz designs with 50 Hz information on 2,4,6 Pole 1-125 Hp ratings
• Suitable for Inverter use per NEMA MG1 Part 31.4.4.2
• Designed for longevity with a 3 year warranty on premium efficient Super-E® Motors

Catalog Number    CEM3558T
Enclosure    TEFC
Frame    145TC
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    2.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CURUSEEV
NEMA_PREMIUM
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Current @ Voltage    5.600 A @ 230.0 V
5.800 A @ 208.0 V
2.800 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    86.5 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    2.8 a
Insulation Class    F
Inverter Code    Inverter Ready
KVA Code    K
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3528M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    13.29 IN
Power Factor    77
Product Family    General Purpose
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    0.875 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1760 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None