CECP84110T-4 Baldor Motor 40HP 1775RPM 324TC TEFC 460 Volt 3 Phase 12-0000-0419

CECP84110T-4 Baldor 40HP 1775RPM 3PH 324TC TEFC

Baldor Severe Duty Totally Enclosed Fan Cooled Motors used for Typical applications include Petro-Chemical plants, mines, foundries, pulp and paper plants, waste management facilities, chemical plants, tropical climates and other processing industry applications requiring protection against corrosion caused by severe environmental operating conditions

Baldor Motor Parts, Diagrams and Specs Available!

Specification # 12E920X730

Catalog Number    CECP84110T-4
Enclosure    TEFC
Frame    324TC
Frame Material    Cast Iron
Frequency    60.00 Hz
Haz Area Class and Group    CLI GP A,B,C,D
Haz Area Division    Division II
Motor Letter Type    Three Phase
Output @ Frequency    40.000 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1800 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
Agency Approvals    NEMA_PREMIUM
UR
CSA EEV
CCSA US
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Constant Torque Speed Range    1
Current @ Voltage    46.000 A @ 460.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    94.1 %
Electrically Isolated Bearing    Not Electrically Isolated
Enclosure Modification    841
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Haz Area Temp Code    T3
Heater Indicator    No Heater
High Voltage Full Load Amps    46.0 a
Insulation Class    F
Inverter Code    Inverter Duty
IP Rating    IP56
KVA Code    F
Lifting Lugs    Standard Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    2700 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    3 @ 8 AWG
Motor Lead Termination    Ring Terminals
Motor Standards    NEMA
Motor Type    1260M
Mounting Arrangement    F1
Number of Poles    4
Overall Length    30.74 IN
Power Factor    86
Product Family    Chem Process S/P 32-8 IEEE 841
Pulley End Bearing Type    Ball
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
Service Factor    1.15
Shaft Diameter    2.125 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1770 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None