CDM3539 Baldor Motor 1/2HP 1140RPM 56C TEFC 208-230/460 Volt 3 Phase 34M811W012G1

Features:
• Cast iron endplates & conduit box
• 300 series stainless steel shaft extension
• 2 part epoxy paint system passed 2,000+ hours salt fog test per ASTM B 117
• Permanently lubricated, double sealed ball bearings
• IP56 enclosure includes: labyrinth shaft seals, gasketed conduit box and cover
• Inverter ready nameplate
• Meets IEEE 45 on nameplate

Applications:
• Chemical, oil & gas
• Pulp & paper, forest products
• Coastal marine

Catalog Number    CDM3539
Enclosure    TEFC
Frame    56C
Frame Material    Steel
Frequency    60.00 Hz
Haz Area Class and Group    None
Haz Area Division    Not Applicable
Motor Letter Type    Three Phase
Output @ Frequency    .500 HP @ 60 HZ
Phase    3
Synchronous Speed @ Frequency    1200 RPM @ 60 HZ
Voltage @ Frequency    460.0 V @ 60 HZ
230.0 V @ 60 HZ
Agency Approvals    CCSA US
UR
Ambient Temperature    40 °C
Auxillary Box    No Auxillary Box
Auxillary Box Lead Termination    None
Base Indicator    Rigid
Bearing Grease Type    Polyrex EM (-20F +300F)
Blower    None
Constant Torque Speed Range    6
Current @ Voltage    1.300 A @ 460.0 V
2.600 A @ 230.0 V
Design Code    B
Drip Cover    No Drip Cover
Duty Rating    CONT
Efficiency @ 100% Load    72.0 %
Electrically Isolated Bearing    Not Electrically Isolated
Feedback Device    NO FEEDBACK
Front Face Code    Standard
Front Shaft Indicator    None
Heater Indicator    No Heater
High Voltage Full Load Amps    1.3 a
Insulation Class    F
Inverter Code    Not Inverter
KVA Code    N
Lifting Lugs    No Lifting Lugs
Locked Bearing Indicator    Locked Bearing
Max Speed    1800 rpm
Motor Lead Exit    Ko Box
Motor Lead Quantity/Wire Size    9 @ 18 AWG
Motor Lead Termination    Flying Leads
Motor Standards    NEMA
Motor Type    3428M
Mounting Arrangement    F1
Number of Poles    6
Overall Length    12.85 IN
Power Factor    51
Product Family    Dirty Duty Plus
Pulley End Bearing Type    Sealed Bearing
Pulley Face Code    C-Face
Pulley Shaft Indicator    Standard
Rodent Screen    None
RoHS Status    ROHS COMPLIANT
Service Factor    1.25
Shaft Diameter    0.625 IN
Shaft Extension Location    Pulley End
Shaft Ground Indicator    No Shaft Grounding
Shaft Rotation    Reversible
Shaft Slinger Indicator    No Slinger
Speed    1140 rpm
Speed Code    Single Speed
Starting Method    Direct on line
Thermal Device - Bearing    None
Thermal Device - Winding    None
Vibration Sensor Indicator    No Vibration Sensor
Winding Thermal 1    None
Winding Thermal 2    None