Home » AOM3705T Baldor Motor 3HP 865RPM 215T TEAO 230/460 Volt 3 Phase 37F359T944G1
AOM3705T Baldor Motor 3HP 865RPM 215T TEAO 3 Phase 37F359T944G1

* Image is for reference only

AOM3705T Baldor Motor 3HP 865RPM 215T TEAO 230/460 Volt 3 Phase 37F359T944G1

SKU: AOM3705T
$2,090.53
$3,310.00 Sale $2,090.53
Description

Features:
• 36” long leads for ease of connectivity
• Oversized ball bearings for large overhung load from shaft mounted fans
• Locked DE bearing to allow mounting in any configuration

Applications:
• Fans
• Pumps
• Blowers
• Condensers
• Air handling
• HVAC systems
• General purpose applications

Specs

 

Catalog Number AOM3705T Enclosure TEAO Frame 215T Frame Material Steel Frequency 60.00 Hz Haz Area Class and Group None Haz Area Division Not Applicable Motor Letter Type Three Phase Output @ Frequency 3.000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 900 RPM @ 60 HZ Voltage @ Frequency 208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ Agency Approvals CURUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 10.400 A @ 230.0 V
11.300 A @ 208.0 V
5.200 A @ 460.0 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 86.5 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater High Voltage Full Load Amps 5.2 a Insulation Class F Inverter Code Not Inverter KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3744M Mounting Arrangement F1 Number of Poles 8 Overall Length 17.44 IN Power Factor 62 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.00 Shaft Diameter 1.375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 865 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None
Nameplate

 

CAT.NO. AOM3705T
SPEC. 37F359T944G1
HP 3 AIR OVER
VOLTS 208-230/460
AMP 11.3-10.4/5.2
RPM 865
FRAME 215T HZ 60 PH 3
SER.F. 1.00 CODE H DES B CLASS F
NEMA-NOM-EFF 86.5 PF 62
RATING 40C AMB-CONT
CC
DE 6307 ODE 6206
ENCL TEAO SN
850 FPM AT 170 CFM
NP1256L

 

Performance

 

General Characteristics

Full Load Torque 18.4 LB-FT Start Configuration DOL
No-Load Current 3.21 Amps Break-Down Torque 49 LB-FT
Line-line Res. @ 25°C. 3.5 Ohms A Ph / 0 Ohms B Ph Pull-Up Torque 27.6 LB-FT
Temp. Rise @ Rated Load 34°C Locked-Rotor Torque 30.6 LB-FT
Temp. Rise @ S.F. Load Starting Current 25.6 Amps

Load Characteristics

% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 27 43 55 62 66 69 0
Efficiency 78.9 85.6 87 87.3 85.6 83 0
Speed (RPM) 891 884 875 865 853 840 0
Line Amperes 3.39 3.82 4.45 5.25 6.18 7.3 0

 

Parts

Product Number

Description

Quantity

SA160919

SA 37F359T944G1

1 EA

RA149496

RA 37F359T944G1

1 EA

HW3200A01

3/8-16X3/4 EYEBOLT WELDED F/S

1 EA

37CB3004

37 CB CASTING W/1.09 LEAD HOLE @ 6:00

1 EA

37GS1000SP

GASKET, CONDUIT BOX STD., .06 THICK LEXI

1 EA

10XN2520A10

1/4-20X 5/8 HEX HD X

2 EA

HW1001A25

LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I

2 EA

11XW1032G06

10-32 X .38, TAPTITE II, HEX WSHR SLTD U

1 EA

37EP3101A02

FR ENDPLATE, 37L&M-TENV MTR, MACH

1 EA

HW4500A01

1641B(ALEMITE)400 UNIV, GREASE FITT

1 EA

HW5100A06

W2420-025 WVY WSHR (WB)

1 EA

37EP3100A09

PU ENDPLATE, MACH

1 EA

HW4500A01

1641B(ALEMITE)400 UNIV, GREASE FITT

1 EA

10XN2520A28

1/4-20X 1 3/4 HEX HD

4 EA

HW1001A25

LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I

4 EA

XY3118A12

5/16-18 HEX NUT DIRECTIONAL SERRATION

4 EA

37CB4516

LIPPED LID FOR 37 FRAME NEC KOBX

1 EA

37GS1008

37 GS FOR CB LID - LEXIDE

1 EA

51XW0832A07

8-32 X .44, TAPTITE II, HEX WSHR SLTD SE

4 EA

HW2501F21

KEY, 5/16 SQ X 2.375

1 EA

HA7000A02

KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA

1 EA

85XU0407S04

4X1/4 U DRIVE PIN STAINLESS

2 EA

MJ1000A02

GREASE, POLYREX EM EXXON

0.05 LB

MG1050G01

CELEROL MEDIUM CHARCOAL METALLIC GRAY

0.028 GA

HA3104A17

5/16-18X13.250 T-BLT/OHIO

4 EA

LC0005

CONN.DIA.,TY M,9-LD,DUAL VOLT,REVERSING

1 EA

NP1256L

ALUM UL CC INDUSTRIAL MOTOR A60

1 EA

36PA1001

PKG GRP, PRINT PK1017A06

1 EA

MN416A01

TAG-INSTAL-MAINT no wire (2500bx)4/22

1 EA

LB1624

COMBINED WARNING LABEL, ISO/ANSI PICTOGR

1 EA