Home » AOM3702T Baldor Motor 2HP 855RPM 213T TEAO 208-230/460 Volt 3 Phase 37F359T938G1
AOM3702T Baldor Motor 2HP 855RPM 213T TEAO 3 Phase 37F359T938G1

* Image is for reference only

AOM3702T Baldor Motor 2HP 855RPM 213T TEAO 208-230/460 Volt 3 Phase 37F359T938G1

SKU: AOM3702T
$1,816.80
$3,028.00 Sale $1,816.80

Features:
• 36” long leads for ease of connectivity
• Oversized ball bearings for large overhung load from shaft mounted fans
• Locked DE bearing to allow mounting in any configuration

Applications:
• Fans
• Pumps
• Blowers
• Condensers
• Air handling
• HVAC systems
• General purpose applications

 

Catalog Number AOM3702T

Enclosure TEAO Frame 213T Frame Material Steel Frequency 60.00 Hz Haz Area Class and Group None Haz Area Division Not Applicable Motor Letter Type Three Phase Output @ Frequency 2.000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 900 RPM @ 60 HZ Voltage @ Frequency 208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ Agency Approvals CURUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 3.500 A @ 460.0 V
7.000 A @ 230.0 V
7.600 A @ 208.0 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 82.5 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater High Voltage Full Load Amps 3.5 a Insulation Class F Inverter Code Not Inverter KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3724M Mounting Arrangement F1 Number of Poles 8 Overall Length 16.32 IN Power Factor 65 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.00 Shaft Diameter 1.375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 855 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None

 

CAT.NO. AOM3702T
SPEC. 37F359T938G1
HP 2
VOLTS 208-230/460
AMP 7.6-7/3.5
RPM 855
FRAME 213T HZ 60 PH 3
SER.F. 1.00 CODE H DES B CLASS F
NEMA-NOM-EFF 82.5 PF 65
RATING 40C AMB-CONT
CC
DE 6307 ODE 6206
ENCL TEAO SN
NP1256L

 

General Characteristics

Full Load Torque 12.2 LB-FT Start Configuration DOL
No-Load Current 2.2 Amps Break-Down Torque 35.9 LB-FT
Line-line Res. @ 25°C. 6.98 Ohms A Ph / 0 Ohms B Ph Pull-Up Torque 18 LB-FT
Temp. Rise @ Rated Load 50°C Locked-Rotor Torque 21.5 LB-FT
Temp. Rise @ S.F. Load Starting Current 16.3 Amps

Load Characteristics

% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 28 44 56 64 69 73 0
Efficiency 72.2 80.8 83.3 83.6 81.7 78.3 0
Speed (RPM) 889 879 868 856 841 823 0
Line Amperes 2.3 2.59 2.99 3.49 4.11 4.91 0

 

Product Number

Description

Quantity

SA152818

SA 37F359T938G1

1 EA

RA141579

RA 37F359T938G1

1 EA

HW3200A01

3/8-16X3/4 EYEBOLT WELDED F/S

1 EA

37CB3004

37 CB CASTING W/1.09 LEAD HOLE @ 6:00

1 EA

37GS1000SP

GASKET, CONDUIT BOX STD., .06 THICK LEXI

1 EA

10XN2520A10

1/4-20X 5/8 HEX HD X

2 EA

HW1001A25

LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I

2 EA

11XW1032G06

10-32 X .38, TAPTITE II, HEX WSHR SLTD U

1 EA

37EP3101A02

FR ENDPLATE, 37L&M-TENV MTR, MACH

1 EA

HW4500A01

1641B(ALEMITE)400 UNIV, GREASE FITT

1 EA

HW5100A06

W2420-025 WVY WSHR (WB)

1 EA

37EP3100A09

PU ENDPLATE, MACH

1 EA

HW4500A01

1641B(ALEMITE)400 UNIV, GREASE FITT

1 EA

10XN2520A28

1/4-20X 1 3/4 HEX HD

4 EA

HW1001A25

LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I

4 EA

XY3118A12

5/16-18 HEX NUT DIRECTIONAL SERRATION

4 EA

37CB4516

LIPPED LID FOR 37 FRAME NEC KOBX

1 EA

37GS1008

37 GS FOR CB LID - LEXIDE

1 EA

51XW0832A07

8-32 X .44, TAPTITE II, HEX WSHR SLTD SE

4 EA

HW2501F21

KEY, 5/16 SQ X 2.375

1 EA

HA7000A02

KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA

1 EA

85XU0407S04

4X1/4 U DRIVE PIN STAINLESS

2 EA

MJ1000A02

GREASE, POLYREX EM EXXON

0.05 LB

MG1050G01

CELEROL MEDIUM CHARCOAL METALLIC GRAY

0.028 GA

HA3104A14

THRUBOLT- 5/16-18 X12.125(OHIO)

4 EA

LC0005

CONN.DIA.,TY M,9-LD,DUAL VOLT,REVERSING

1 EA

NP1256L

ALUM UL CC INDUSTRIAL MOTOR A60

1 EA

36PA1001

PKG GRP, PRINT PK1017A06

1 EA

MN416A01

TAG-INSTAL-MAINT no wire (2500bx)4/22

1 EA

LB1624

COMBINED WARNING LABEL, ISO/ANSI PICTOGR

1 EA