Home » AOM3543 Baldor Motor 3/4HP 1140RPM 56 TEAO 208-230/460 Volt 3 Phase 34T045W012G1
AOM3543 Baldor Motor 3/4HP 1140RPM 56 TEAO 3 Phase 34T045W012G1

* Image is for reference only

AOM3543 Baldor Motor 3/4HP 1140RPM 56 TEAO 208-230/460 Volt 3 Phase 34T045W012G1

SKU: AOM3543
$609.60
$1,016.00 Sale $609.60

Features:
• 36” long leads for ease of connectivity
• Oversized ball bearings for large overhung load from shaft mounted fans
• Locked DE bearing to allow mounting in any configuration

Applications:
• Fans
• Pumps
• Blowers
• Condensers
• Air handling
• HVAC systems
• General purpose applications

 

 

Catalog Number AOM3543 Enclosure TEAO Frame 56 Frame Material Steel Frequency 60.00 Hz Haz Area Class and Group None Haz Area Division Not Applicable Motor Letter Type Three Phase Output @ Frequency .750 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1200 RPM @ 60 HZ Voltage @ Frequency 208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ Agency Approvals CURUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 1.500 A @ 460.0 V
3.000 A @ 230.0 V
3.300 A @ 208.0 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 77.0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater High Voltage Full Load Amps 1.5 a Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3428M Mounting Arrangement F1 Number of Poles 6 Overall Length 11.75 IN Power Factor 59 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.00 Shaft Diameter 0.625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1140 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None

 

 

CAT.NO. AOM3543
SPEC. 34T045W012G1
HP .75
VOLTS 208-230/460
AMP 3.3-3/1.5
RPM 1140
FRAME 56 HZ 60 PH 3
SER.F. 1.00 CODE K DES B CLASS F
NEMA-NOM-EFF 77 PF 59
RATING 40C AMB-CONT
CC
DE 6203 ODE 6203
ENCL TEAO SN
1000 FPM @ 44 CFM
NP1256L

 

General Characteristics

Full Load Torque 3.4 LB-FT Start Configuration DOL
No-Load Current 1.1 Amps Break-Down Torque 11.8 LB-FT
Line-line Res. @ 25°C. 21.9 Ohms A Ph / 0 Ohms B Ph Pull-Up Torque 9.3 LB-FT
Temp. Rise @ Rated Load 60°C Locked-Rotor Torque 9.7 LB-FT
Temp. Rise @ S.F. Load Starting Current 7.4 Amps

Load Characteristics

% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 26 40 51 59 65 68 0
Efficiency 60 72 76 77 75 73 0
Speed (RPM) 1185 1170 1155 1135 1115 1095 0
Line Amperes 1.1 1.2 1.4 1.5 1.7 2 0

 

 

Product Number

Description

Quantity

SA165150

SA 34T045W012G1

1 EA

RA153562

RA 34T045W012G1

1 EA

NS2512A01

INSULATOR, CONDUIT BOX X

1 EA

34CB3002A

CB CAST W/.88 DIA HOLE

1 EA

34GS1029A01

GASKET, CONDUIT BOX

1 EA

51XB1016A07

10-16 X 7/16 HXWSSLD SERTYB

2 EA

11XW1032G06

10-32 X .38, TAPTITE II, HEX WSHR SLTD U

1 EA

34EP3100A03SP

FR ENDPLATE, MACH

1 EA

HW5100A03

WAVY WASHER (W1543-017)

1 EA

34EP3102A02SP

FR/PU ENDPLATE, MACH

1 EA

XY1032A02

10-32 HEX NUT DIRECTIONAL SERRATION

4 EA

34CB4517

CB LID 4 MTG HOLES .22 DIA STAMPED, FOR

1 EA

34GS1031A01

GASKET, FLAT CONDUIT BOX LID (LEXIDE)

1 EA

51XW0832A07

8-32 X .44, TAPTITE II, HEX WSHR SLTD SE

4 EA

HW2501D13

KEY, 3/16 SQ X 1.375

1 EA

HA7000A04

KEY RETAINER 0.625 DIA SHAFTS

1 EA

MG1050G01

CELEROL MEDIUM CHARCOAL METALLIC GRAY

0.014 GA

85XU0407S04

4X1/4 U DRIVE PIN STAINLESS

2 EA

HA3100A45

THRUBOLT 10-32 X 8.875

4 EA

MN416A01

TAG-INSTAL-MAINT no wire (2500bx)4/22

1 EA

LC0005E01

CONN.DIA./WARNING LABEL (LC0005/LB1119N)

1 EA

NP1256L

ALUM UL CC INDUSTRIAL MOTOR A60

1 EA

35PA1066

PKG GRP, PRINT PK1008A06

1 E