Home » AOM3455 Baldor Motor 1/4HP 1140RPM 48 TEAO 208-230/460 Volt 3 Phase 34K099-5882G2
AOM3455 Baldor Motor 1/4HP 1140RPM 48 TEAO 3 Phase 34K099-5882G2

* Image is for reference only

AOM3455 Baldor Motor 1/4HP 1140RPM 48 TEAO 208-230/460 Volt 3 Phase 34K099-5882G2

SKU: AOM3455
$550.11
$871.00 Sale $550.11
Description

Specification # 34K099-5882G2

Features:

  • 36” long leads for ease of connectivity
  • Oversized ball bearings for large overhung load from shaft mounted fans
  • Locked DE bearing to allow mounting in any configuration

Applications:

  • Fans
  • Pumps
  • Blowers
  • Condensers
  • Air handling
  • HVAC systems
  • General purpose applications
Specs
Catalog Number AOM3455 Enclosure TEAO Frame 48 Frame Material Steel Frequency 60.00 Hz Haz Area Class and Group None Haz Area Division Not Applicable Motor Letter Type Three Phase Output @ Frequency .250 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1200 RPM @ 60 HZ Voltage @ Frequency 230.0 V @ 60 HZ
460.0 V @ 60 HZ Agency Approvals CURUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage .700 A @ 460.0 V
1.400 A @ 230.0 V
1.500 A @ 208.0 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 68.0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater High Voltage Full Load Amps 0.7 a Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3411M Mounting Arrangement F1 Number of Poles 6 Overall Length 9.63 IN Power Factor 51 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.00 Shaft Diameter 0.500 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1140 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None

 

Nameplate

 

CAT.NO. AOM3455
SPEC. 34K099-5882G2
HP .25
VOLTS 230/460
AMP 1.4/.7
RPM 1140
FRAME 48 HZ 60 PH 3
SER.F. 1.00 CODE K DES B CLASS F
NEMA-NOM-EFF 68 PF 51
RATING 40C AMB-CONT
CC
DE 6203 ODE 6203
ENCL TEAO SN
NP1256L

 

Performance

 

General Characteristics

Full Load Torque 1.15 LB-FT Start Configuration DOL
No-Load Current 0.57 Amps Break-Down Torque 3.8 LB-FT
Line-line Res. @ 25°C. 80.7 Ohms A Ph / 0 Ohms B Ph Pull-Up Torque 2.9 LB-FT
Temp. Rise @ Rated Load 41°C Locked-Rotor Torque 3 LB-FT
Temp. Rise @ S.F. Load Starting Current 2.5 Amps

Load Characteristics

% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 24 34 43 51 58 61 0
Efficiency 44 57 64 67.4 68 67.7 0
Speed (RPM) 1184 1171 1157 1139 1122 1109 0
Line Amperes 0.57 0.6 0.63 0.68 0.73 0.78 0

 

Parts
Product Number Description Quantity
SA165151 SA 34K099-5882G2 1 EA
RA153563
RA 34K099-5882G2 1 EA
NS2512A01
INSULATOR, CONDUIT BOX X 1 EA
34CB3002A
CB CAST W/.88 DIA HOLE 1 EA
34GS1029A01
GASKET, CONDUIT BOX 1 EA
51XB1016A07
10-16 X 7/16 HXWSSLD SERTYB 2 EA
11XW1032G06
10-32 X .38, TAPTITE II, HEX WSHR SLTD U 1 EA
34EP3100A03SP
FR ENDPLATE, MACH 1 EA
HW5100A03
WAVY WASHER (W1543-017) 1 EA
34EP3102A02SP
FR/PU ENDPLATE, MACH 1 EA
XY1032A02
10-32 HEX NUT DIRECTIONAL SERRATION 4 EA
34CB4517
CB LID 4 MTG HOLES .22 DIA STAMPED, FOR 1 EA
34GS1031A01
GASKET, FLAT CONDUIT BOX LID (LEXIDE) 1 EA
51XW0832A07
8-32 X .44, TAPTITE II, HEX WSHR SLTD SE 4 EA
MG1050G01
CELEROL MEDIUM CHARCOAL METALLIC GRAY 0.014 GA
85XU0407S04
4X1/4 U DRIVE PIN STAINLESS 2 EA
HA3100A12
THRUBOLT 10-32 X 7.375 4 EA
LC0005E01
CONN.DIA./WARNING LABEL (LC0005/LB1119N) 1 EA
MN416A01
TAG-INSTAL-MAINT no wire (2500bx)4/22 1 EA
NP1256L
ALUM UL CC INDUSTRIAL MOTOR A60 1 EA
34PA1002
PKG GRP, PRINT PK1001A01 1 EA