Specification # 34M899X030G1
Baldor Motor ANFL3507M is a reliable choice for your poultry feed auger drive systems.
Features include:
- Mechanical protection of centrifugal switch to prevent damage to motor in case of over speed
- Manual reset thermal protection mounted in oversize conduit box
- Tan epoxy paint and thermal cover protect motor from harsh environments
- Extended shaft (fan end) with wrench flats for manual jogging of auger
- NEMA 56N flange mounts to drive/gear box assembly
- High efficiency design
- Moisture resistant 200° C moisture resistant windings
Catalog NumberANFL3507M
EnclosureTEFC
Frame48YZ
Frame MaterialSteel
Frequency60.00 Hz
Haz Area Class and GroupNone
Haz Area DivisionNot Applicable
Motor Letter TypeCap Start, Cap Run
Output @ Frequency.750 HP @ 60 HZ
Phase1
Synchronous Speed @ Frequency1800 RPM @ 60 HZ
Voltage @ Frequency230.0 V @ 60 HZ
115.0 V @ 60 HZ
Agency ApprovalsCURUS
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorNo Mounting
Bearing Grease TypePolyrex EM (-20F +300F)
BlowerNone
Current @ Voltage8.200 A @ 115.0 V
5.400 A @ 208.0 V
4.100 A @ 230.0 V
Design CodeN
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load74.0 %
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNO FEEDBACK
Front Face CodeStandard
Front Shaft IndicatorMultiple Flats
Heater IndicatorNo Heater
High Voltage Full Load Amps4.1 a
Insulation ClassB
Inverter CodeNot Inverter
KVA CodeJ
Lifting LugsNo Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKo Box
Motor Lead Quantity/Wire Size6 @ 18 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type3428LC
Mounting ArrangementF1
Number of Poles4
Overall Length13.32 IN
Power Factor80
Product FamilyGeneral Purpose
Product TypeFARM DUTY
Pulley End Bearing TypeBall
Pulley Face CodeOther
Pulley Shaft IndicatorStandard
Rodent ScreenNone
RoHS StatusROHS COMPLIANT
Service Factor1.25
Shaft Diameter0.500 IN
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorNo Slinger
Speed1725 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNone
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1Manual Thermal Overload
Winding Thermal 1 LocationKO
Winding Thermal 2None
