AEM3686-4 Baldor Motor 1.5HP 1760RPM 184 TEFC 460 Volt 3 Phase 06F062Y443G1
Regular price
Regular price
Sale
Sale price
- Description
- Specs
- Nameplate
- Performance
- Parts
Description
Specification # 06F062W403
Baldor motor AEM3686-4 for use in plants requiring Automotive Approved Motors on pumps, compressors, fans, conveyors, machine tools and other applications. Buy Baldor Motor AEM3686-4 from Square One today and get fast shipping.
Features of AEM3686-4 include:
• Approved by major US automobile manufacturers
• Meets efficiency times power factor requirements per GM7EQ
• All cast iron construction
• Regreasable double shield ball bearings
• Shaft slinger on both ends of motor
• Stainless steel nameplate
• Epoxy paint
• Suitable for 65ºC ambient 1.00 Service Factor or 1.15 Service Factor, 40ºC ambient
• Meets automotive requirements for sound levels
• Meets GM for minimum efficiency times power factor requirements per GM7EHQ
Specs
Catalog NumberAEM3686-4
EnclosureTEFC
Frame184
Frame MaterialCast Iron
Frequency60.00 Hz
Haz Area Class and GroupNone
Haz Area DivisionNot Applicable
Motor Letter TypeThree Phase
Output @ Frequency1.500 HP @ 60 HZ
Phase3
Synchronous Speed @ Frequency1800 RPM @ 60 HZ
Voltage @ Frequency460.0 V @ 60 HZ
Agency ApprovalsUR
CSA Ambient Temperature65 °C Auxillary BoxNo Auxillary Box Auxillary Box Lead TerminationNone Base IndicatorRigid Bearing Grease TypePolyrex EM (-20F +300F) BlowerNone Current @ Voltage2.100 A @ 460.0 V Design CodeB Drip CoverNo Drip Cover Duty RatingCONT Efficiency @ 100% Load87.5 % Electrically Isolated BearingNot Electrically Isolated Feedback DeviceNO FEEDBACK Front Face CodeStandard Front Shaft IndicatorNone Heater IndicatorNo Heater High Voltage Full Load Amps2.1 a Insulation ClassF Inverter CodeInverter Ready IP RatingNONE KVA CodeL Lifting LugsStandard Lifting Lugs Locked Bearing IndicatorNo Locked Bearing Motor Lead ExitKo Box Motor Lead Quantity/Wire Size3 @ 16 AWG Motor Lead TerminationFlying Leads Motor StandardsNEMA Motor Type0626M Mounting ArrangementF1 Number of Poles4 Overall Length14.74 IN Power Factor74 Product FamilyAutomotive (Not For DC) Pulley End Bearing TypeBall Pulley Face CodeStandard Pulley Shaft IndicatorStandard Rodent ScreenNone Service Factor1.00 Shaft Diameter0.875 IN Shaft Extension LocationPulley End Shaft Ground IndicatorNo Shaft Grounding Shaft RotationReversible Shaft Slinger IndicatorNo Slinger Speed1760 rpm Speed CodeSingle Speed Starting MethodDirect on line Thermal Device - BearingNone Thermal Device - WindingNone Vibration Sensor IndicatorNo Vibration Sensor Winding Thermal 1None Winding Thermal 2None
CSA Ambient Temperature65 °C Auxillary BoxNo Auxillary Box Auxillary Box Lead TerminationNone Base IndicatorRigid Bearing Grease TypePolyrex EM (-20F +300F) BlowerNone Current @ Voltage2.100 A @ 460.0 V Design CodeB Drip CoverNo Drip Cover Duty RatingCONT Efficiency @ 100% Load87.5 % Electrically Isolated BearingNot Electrically Isolated Feedback DeviceNO FEEDBACK Front Face CodeStandard Front Shaft IndicatorNone Heater IndicatorNo Heater High Voltage Full Load Amps2.1 a Insulation ClassF Inverter CodeInverter Ready IP RatingNONE KVA CodeL Lifting LugsStandard Lifting Lugs Locked Bearing IndicatorNo Locked Bearing Motor Lead ExitKo Box Motor Lead Quantity/Wire Size3 @ 16 AWG Motor Lead TerminationFlying Leads Motor StandardsNEMA Motor Type0626M Mounting ArrangementF1 Number of Poles4 Overall Length14.74 IN Power Factor74 Product FamilyAutomotive (Not For DC) Pulley End Bearing TypeBall Pulley Face CodeStandard Pulley Shaft IndicatorStandard Rodent ScreenNone Service Factor1.00 Shaft Diameter0.875 IN Shaft Extension LocationPulley End Shaft Ground IndicatorNo Shaft Grounding Shaft RotationReversible Shaft Slinger IndicatorNo Slinger Speed1760 rpm Speed CodeSingle Speed Starting MethodDirect on line Thermal Device - BearingNone Thermal Device - WindingNone Vibration Sensor IndicatorNo Vibration Sensor Winding Thermal 1None Winding Thermal 2None
Nameplate
| CAT.NO. | AEM3686-4 | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPEC. | 06F062Y443G1 | ||||||||||||||||||||||
| VOLTS | 460 | ||||||||||||||||||||||
| AMP | 2.1 | ||||||||||||||||||||||
| RPM | 1760 | HP | 1.5 | ||||||||||||||||||||
| FRAME | 184 | HZ | 60 | PH | 3 | ||||||||||||||||||
| SER.F. | 1.00 | CODE | L | DES | B | CL | F | ||||||||||||||||
| NEMA-NOM-EFF | 87.5 | PF | 74 | ||||||||||||||||||||
| G.MIN.EFF | 86.5 | CC | 010A | ||||||||||||||||||||
| RATING | 65C AMB-CONT | ||||||||||||||||||||||
| LUBRICATION | POLYREX EM | ||||||||||||||||||||||
| DE | 6206 | ODE | 6205 | ||||||||||||||||||||
| ENCL | TEFC |
SER. #
|
|||||||||||||||||||||
Performance
Performance Data at
(Typical performance - Not guaranteed values)
General Characteristics
| Full Load Torque | 4.44 LB-FT | Start Configuration | DOL |
|---|---|---|---|
| No-Load Current | 1.26 Amps | Break-Down Torque | 17.6 LB-FT |
| Line-line Res. @ 25°C. | 9.18 Ohms A Ph / 0 Ohms B Ph | Pull-Up Torque | 10.1 LB-FT |
| Temp. Rise @ Rated Load | 22°C | Locked-Rotor Torque | 11.8 LB-FT |
| Temp. Rise @ S.F. Load | Starting Current | 17.5 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S.F. | |
|---|---|---|---|---|---|---|---|---|
| Power Factor | 34 | 54 | 67 | 74 | 79 | 82 | 0 | |
| Efficiency | 75.4 | 84.6 | 87.1 | 87.7 | 87.2 | 86 | 0 | |
| Speed (RPM) | 1791 | 1783 | 1773 | 1765 | 1754 | 1742 | 0 | |
| Line Amperes | 1.34 | 1.53 | 1.79 | 2.14 | 2.53 | 2.95 | 0 |
Parts
| Product Number | Description | Quantity |
|---|---|---|
| SA294372 | SA 06F062Y443G1 | 1 EA |
| RA280452 | RA 06F062Y443G1 | 1 EA |
| 36FN3000C01SP | EXFN, PLASTIC, 5.25 OD, .912 ID | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 06CB1000A02 | CONDUIT BOX, MACH, W/.75 PIPE TAP & #18 | 1 EA |
| RM1016 | LEAD SEPARATOR GASKET - 305/306 C.P.MOTO | 1 EA |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 | 2 EA |
| 11XW1032G06 | 10-32 X .38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | BRASS CUP WASHER, FOR #10 SCREW | 1 EA |
| 36EP1101A51 | FR ENDPLATE MACH, TEFC | 1 EA |
| HW4500A19 | 1/4-28X1/4 SLOTTED PLUG F/S | 2 EA |
| HA4054 | SHORT T-DRAIN FITTING, .125" N.P.T. | 1 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 36EP1100A21 | PU ENDPLATE MACH | 1 EA |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 1 EA |
| HW4500A19 | 1/4-28X1/4 SLOTTED PLUG F/S | 2 EA |
| HA3101A34 | THRUBOLT- 1/4-20 X 10.375 | 4 EA |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA |
| 36FH4009A31 | IEC FH W/GREASER & SPL NOTCH, W/ PRIMER | 1 EA |
| 51XW1032A06 | 10-32 X .38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 06CB1500A01 | CONDUIT BOX LID, MACH | 1 EA |
| 06GS1003 | GASKET, KOBX LID, 1/8" THICK BLACK NEOPR | 1 EA |
| 10XN2520A12 | 1/4-20 X 3/4 HEX HEAD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 2 EA |
| HA1005A22 | SLINGER, OD 2.00, ID 1.14, 206 BRG, GM | 1 EA |
| HA1005A03SP | SLINGER, OD 1.750, ID .938, 205 BRG | 1 EA |
| MJ5001A27 | 32220KN GRAY SEALER *MIN BUY 4 QTS=1GAL | 0.001 QT |
| MJ5001A02 | 732 CL SEALANT 3 OZ DIXIE BEARING 289100 | 0.001 EA |
| MJ5001A14 | DYNAPRO SEALANT, CP MTR VC#2508050 (603 | 0.001 EA |
| HW2501D13 | KEY, 3/16 SQ X 1.375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8" DIA SHAFT | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB1624 | COMBINED WARNING LABEL, ISO/ANSI PICTOGR | 1 EA |
| WD1000B03 | BURNDY YAV14 TERML (1M/PK) | 3 EA |
| MJ1000A02 | GREASE, POLYREX EM EXXON | 0.05 LB |
| 51XB1214A16 | 12-14X1.00 HXWSSLD SERTYB | 1 EA |
| MG1025G02 | WILKOFAST, 782.02, LIGHT GRAY | 0.028 GA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1404 | SS UL CSA CC "AUTOMOTIVE" | 1 EA |
| 36PA1001 | PKG GRP, PRINT PK1017A06 | 1 EA |
| MN416A01 | TAG-INSTAL-MAINT no wire (2500bx)4/22 | 1 EA |